All of the most critical gear for the tower erectors, contractors, and professionals in the wireless communications infrastructure industry
Issue link: http://talleyinc.uberflip.com/i/1470421
MODULAR POWER SERIES 12, 24 and 48 volt redundant DC power systems Up to four 700W hot swap power modules Optional TCP/IP based remote monitoring and control Remote E-mail alarms and module control over Ethernet Optional single or dual 100A battery breakers with LVD Advanced battery management features Optional 4 output load distribution with remote power cycling PLATINUM SERIES 12, 24 and 48 volt DC power supplies 800 or 1600 watt power output Standard TCP/IP based remote monitoring and control Remote E-mail alarms over Ethernet Optional battery backup with LVD and advanced battery management features including run-time remaining, discharge testing, and lithium-ion support DC power solutions from ICT provide unmatched flexibility in power, voltage, functionality and connectivity for a range of DC power infrastructure requirements for wireless communications networks. Intelligent Control options on Modular Power and Platinum Series include a secure, easy to use web browser interface that provides remote monitoring, alarm reporting, and control of the system over an Ethernet link. SNMP support allows for integration of the power systems into your wireless network management system. Distribution Series 3 dual bus load distribution panels allow remote monitoring of 12 individual outputs over Ethernet, including the ability to power cycle, load shed, and auto restart connected devices, all from your office. Choose the solution thatʼs right for you. DISTRIBUTION SERIES 3 Connect up to 12 DC devices such as radios, repeaters, backhaul radios, routers and switches Supports 12, 24 or 48 volts DC input, as well as different voltages and polarities on each bus Each output features independent current sensing with remote reporting over Ethernet Each output can be power cycled remotely Automatic load shedding and auto restart saves unnecessary trips to your site DC POWER SOLUTIONS FOR WIRELESS BASE STATIONS Remote Management of DC Power Systems and Connected Loads Over Ethernet ICT200DB-12IRC Distribution Panel Status & Control BusA: Voltage: Current: Form C Alarm: Output #1A: Current: Status: +12VDC Bus 13.6VDC 63.4A Inactive Status & Control Device Setup Output Setup Bus Setup Network Setup Email Setup Alarm Setup User Setup Maintenance Help Demonstration Site ICT200DB-12IRC Distribution Panel IP Address: 209.121.192.82 Firmware: v3.10 Copyright © 2017 Innovative Circuit Technology Ltd. 1 2 3 4 5 Alarm Inputs: Enable Bus Disable Bus Radio 1 8.7A Enabled Off Output #2A: Current: Status: Radio 2 5.6A Enabled Off Output #3A: Current: Status: Radio 3 3.2A Enabled Off Output #4A: Current: Status: Radio 4 1.4A Enabled Off Output #5A: Current: Status: Repeater 5 13.2A Enabled Off Output #6A: Current: Status: Repeater 6 14.7A Enabled Off BusB: Voltage: Current: Form C Alarm: Output #1B: Current: Status: -48VDC Bus -53.4VDC -30.8A Triggered Enable Bus Disable Bus MW Radio 1 -8.2A Enabled Off Output #2B: Current: Status: MW Radio 2 -5.2A Enabled Off Output #3B: Current: Status: Router -6.8A Enabled Off Output #4B: Current: Status: Firewall -4.0A Enabled Off Output #5B: Current: Status: 0.0A Disabled On Output #6B: Current: Status: 0.0A Disabled On Built-in Graphical User Interfaces require no software, are intuitive to use, and allow full monitoring and control of DC power functions remotely over Ethernet.