Power
Dividers
Power Dividers
553
© 2012 all rights reserved
DALLAS • KANSAS CITY • LOS ANGELES • MINNEAPOLIS • NEW YORK • PHOENIX • SACRAMENTO • SEATTLE
FAX 800-530-8821
www.talleycom.com
800-949-7079
Pricing subject to change without notice
For more detailed specs reference www.talleycom.com
Power Dividers
Telewave RF Power Dividers divide up to 500 Watts of power from a single source over 2, 3, or 4 outputs. Dividers are available in over-
lapping frequency bands from 24 MHz to 2.5 GHz, with very low VSWR and insertion loss. Power is divided equally to each output port.
Number of
Order PN Frequency Range Ports Dimensions List Level 1 Level 2 Level 3
ANTPD21
90-210 MHz 2 16"H x 1" x 1"W $164.00 123.00 118.08 114.80
ANTPD24
350-600 MHz 2 2.5" x 8.5" $149.00 111.75 107.28 104.30
ANTPD28
760-920 MHz 2 5.25" x 2.5" x 1 $149.00 111.75 107.28 104.30
ANTPD34
350-600 MHz
3 8.5" x 2.5" x 1" $222.00 166.50 159.84 155.40
ANTPD38
760-920 MHz 3 5.25"L x 2.5" x 1" $222.00 166.50 159.84 155.40
ANTPD44
406-512 MHz 4 8.5" x 2.5" x 1" $240.00 180.00 172.80 168.00
ANTPD224
2.0-2.5 GHz 2 3.25"L x 2.5" x 1"W $149.00 111.75 107.28 104.30
Receiver power splitters provide 2 balanced, 50 ohm outputs from one input. The input port is tuned with a matching network to ensure a
balanced input. Splitters are typically used to drive multiple receivers from a common antenna, and are not designed for transmitters.
Typical loss is 3.2 dB per port, and typical port isolation is 25 dB. VSWR is 1.3:1 or better.
Number of
Order PN Frequency Range Ports Dimensions List Level 1 Level 2 Level 3
PS-1502
132-174 MHz 2 1-3/16" x 1-3/4" x 3-1/2" $121.00 90.75 87.12 84.70
PS-4502
400-512 MHz 2 1-3/16" x 1-3/4" x 3-1/2" $121.00 90.75 87.12 84.70
PS-8602
806-960 MHz
2 1-1/4" x 2-1/4" x 1-1/2" $121.00 90.75 87.12 84.70
PS-1504
132-174 MHz 4 2-2/3" x 1-1/2" x 4-3/4" $224.00 168.00 161.28 156.80
TalleyTestCatalog_125425.QXD 4/12/2012 6:22 PM Page 553
